Equipment & Machinery

Blow Molding Machines from China: Extrusion vs. Stretch Blow Molding

How extrusion blow molding and stretch blow molding differ, which bottles and containers each suits, and what to check when buying a blow molding machine from China.

By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:

Extrusion blow molding (EBM) forms a hollow tube of melted plastic and blows it into a mold, while stretch blow molding (SBM) heats a pre-made preform and stretches and blows it into shape. EBM is used mainly for HDPE and PP containers with handles, such as jugs and chemical bottles; stretch blow molding is used mainly for PET bottles for water, drinks, and personal care.

Chinese manufacturers supply both types, from semi-automatic machines to high-speed rotary lines.

Extrusion blow molding

An extruder melts plastic and forms a hollow tube called a parison. The mold closes around it and air blows it into shape. EBM suits:

  • HDPE milk jugs, detergent bottles, and chemical containers.
  • Containers with handles.
  • Larger containers and drums.

Compare the extruder screw size, number of heads and mold stations, maximum container volume, and parison control.

Stretch blow molding

Stretch blow molding uses preforms, which are injection molded tubes with the finished neck. The machine heats the preforms, then stretches and blows them in the mold. Two-step machines use bought-in preforms. One-step machines make the preform and the bottle in the same machine.

Compare:

  • Bottles per hour, for your bottle size.
  • Number of cavities.
  • Bottle volume range and neck sizes.
  • Heating oven design and energy use.
  • High-pressure air requirement, which needs a suitable compressor.

Ask about molds and changeover

Molds are often quoted separately. Confirm the mold material, the number of bottle designs included, and how long a mold change takes.

Check the supporting equipment

Blow molding needs compressed air, often at high pressure, and chilled water. Confirm what the supplier includes and what you need to buy. See industrial chillers from China.

Test with your bottle design

During factory acceptance testing, produce your bottle and check wall thickness distribution, weight, top-load strength, and leak tests.

Questions to ask the supplier

  1. What output do you guarantee for our bottle size?
  2. How many cavities or heads?
  3. Which molds are included, and how long does changeover take?
  4. What compressed air and chilled water are needed?
  5. Which PLC and key components are used?
  6. What installation and training is included?

Common problems

  • Uneven wall thickness.
  • Output lower than expected.
  • Air compressors that cannot supply enough high-pressure air.
  • Molds that do not produce the right bottle weight.

A hypothetical bottler orders a stretch blow molding machine without checking the high-pressure air supply. The existing compressor cannot keep up. Specifying the air requirement in advance avoids the problem.

How we test a blow molding machine

For a blow molding trial, we ask for the client’s bottle design and resin. We run the machine for a sustained period, count bottles per hour, and weigh a sample of bottles. We cut sample bottles to check wall thickness distribution, and run a simple top-load and leak test. We also check the compressed air and chilled water supply the factory used, because the same performance at the client’s plant depends on matching them.

Mistakes to avoid when buying a blow molding machine

  • Ordering without confirming the high-pressure air and chilled water supply.
  • Judging output from a different bottle size.
  • Leaving molds and change parts off the order.
  • Skipping a bottle trial with your own design.

How Packsel Consulting can help

We help buyers compare blow molding suppliers and witness bottle trials before shipment. See also water bottling machines.

Talk to us about an order. Tell us what you are buying, where the supplier is, and which stage you have reached.

About these articles

Packsel Consulting

Purchasing insights · U.S. and Hong Kong

Practical guidance for U.S. businesses buying from Asia.

How we work
More insights

Get in touch

Tell us what you’re buying.

Send us the product, the supplier if you have one, and your dates. We’ll suggest a scope for one stage or the whole order.