Labeling Machines from China: How to Specify and Test One
How to specify a labeling machine from China: label type and position, containers, label roll specs, speed, accuracy, and testing with your labels.
By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:
To buy a labeling machine from China that works on your line, specify the label type and position, the containers it must handle, the label roll details, and the speed and placement accuracy you need, then test it with your own containers and labels. Most labeling problems come from labels and containers that differ from the ones the factory tested with.
Labeling machines apply labels to bottles, jars, boxes, and pouches. Chinese suppliers offer tabletop, semi-automatic, and inline machines.
Choose the label type
- Wrap-around labels for round bottles and jars.
- Front and back labels for flat or oval containers.
- Top labels for boxes and lids.
- Shrink sleeves, which need a sleeve applicator and a shrink tunnel.
Specify the containers
List every container the machine must handle: shape, size, material, and whether it is filled when labelled. Soft or tapered containers need special handling.
Specify the label rolls
Labeling machines depend on label roll specifications:
- Label size and gap between labels.
- Roll outer diameter and core size.
- Unwind direction, so labels feed the right way up.
- Label material.
Send your label printer’s roll specification to the machine supplier.
Speed and accuracy
Compare containers per minute and placement accuracy, such as within a millimetre. Ask whether the machine uses servo or stepper motors for label feeding.
Test with your labels and containers
Send containers and labels for a factory acceptance test. Check placement, wrinkles, bubbles, overlaps, and speed over a sustained run.
Coders and integration
Ask whether a date coder is included, and how the machine connects to your conveyor and filling line.
Questions to ask the supplier
- Which container sizes and shapes can the machine handle?
- What is the label placement accuracy?
- Which label roll specifications are required?
- What are the speeds with our containers and labels?
- How long does changeover between products take?
- Which motor, sensor, and PLC brands are used?
Integrating with your line
A labeling machine must match the conveyor height, speed, and direction of the rest of the line. Ask the supplier for a layout drawing and confirm how the machine will connect to your filler and packing equipment.
Common problems
- Labels that wrinkle on curved or tapered containers.
- Labels that peel because the container surface is wet or oily.
- Inconsistent placement at higher speeds.
- Label rolls that do not fit the machine.
A hypothetical buyer orders a wrap-around labeler and tests it at the factory with sample bottles. On the production line, the filled bottles are slightly wet from condensation and labels slip. Testing with filled, chilled bottles would have revealed it.
How we test a labeling machine
For a labeling test, we ask the client to send containers and label rolls. We run the machine at the target speed, check label placement on a sample with a ruler, look for wrinkles and bubbles, and time a changeover. Where containers will be filled and chilled, we test with filled containers, because wet or cold surfaces affect adhesion.
Mistakes to avoid when buying a labeling machine
- Testing with sample containers that differ from your production containers.
- Leaving label roll specifications to the label printer to decide.
- Buying a labeler slower than the filler it follows.
- Forgetting the date coder.
How Packsel Consulting can help
We help buyers specify and source labeling equipment and witness tests with your labels and containers.
Talk to us about an order. Tell us what you are buying, where the supplier is, and which stage you have reached.
About these articles
Packsel Consulting
Purchasing insights · U.S. and Hong Kong
Practical guidance for U.S. businesses buying from Asia.
How we work