Equipment & Machinery

Oil Press Machines from China: Screw Press vs. Hydraulic Press

How screw oil presses and hydraulic oil presses differ, which seeds suit each, and what to check when buying an oil press machine from a Chinese manufacturer.

By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:

A screw oil press (also called an expeller) squeezes oil continuously by forcing seeds through a rotating screw inside a cage, while a hydraulic oil press works in batches by pressing a fixed load under high pressure. Screw presses suit most oilseeds and higher volumes; hydraulic presses are often chosen for sesame, cocoa, and other materials where a gentle, batch process is preferred.

Chinese manufacturers supply oil presses from small single machines to complete pressing lines. The right choice depends on the seed, the volume, and whether you want cold-pressed or hot-pressed oil.

How a screw press works

Seeds are fed into a barrel, where a screw carries them forward against increasing pressure. Oil drains out through slots in the barrel, and the pressed cake leaves at the end. Many screw presses can run with or without heating the seeds first.

Points to compare:

  • Rated capacity in kilograms of seed per hour, and for which seed.
  • Motor power and voltage.
  • Screw and barrel material, and whether wear parts are hardened.
  • Whether the press has a heating ring for the barrel.
  • Residual oil in the cake, which shows how much oil the press leaves behind.

How a hydraulic press works

A hydraulic press places prepared material in a chamber and applies pressure with a hydraulic cylinder. It runs in batches, with a cycle time for each load. Hydraulic presses are common for sesame oil, cocoa butter, and some specialty oils. They usually produce less per hour than a screw press of similar cost.

Match the press to your seed

Oil yield and output depend on the seed. Ask the supplier for test results on the seed you will press, at the moisture content you will use. Better still, send seed for a pressing trial and ask for a video of the run, the weight of seed pressed, the oil collected, and the cake.

Check food-contact materials

Parts that touch oil should be suitable for food contact. Ask which parts are stainless steel and which grade. Check the oil collection tray, the filter, and any pipes and tanks.

Plan the rest of the line

A press alone rarely produces finished oil. Most operations also need seed cleaning, sometimes roasting or conditioning, filtration, and storage. Our guide to small-scale oil mill equipment covers a complete line.

Electrical and compliance

Confirm the press is built for your voltage and frequency. If you produce oil for sale in the U.S., your facility will also have food safety obligations, including FDA food facility registration in many cases. Ask your regulatory adviser what applies.

How we run a pressing trial for a client

When a client sends seed for a trial, we weigh the seed before pressing, run the press for a set time after it has warmed up, and weigh the oil and cake that come out. We measure the oil temperature at the outlet and record the barrel temperature. We photograph the oil before and after filtration and keep samples of the cake for a residual oil test if the client wants one. The result is a yield and capacity figure for the client’s seed on that press, which is what matters for the business case.

How Packsel Consulting can help

We source oil press manufacturers, arrange pressing trials with your seed, and inspect machines before shipment. We can compare quotations on the same seed and capacity so the prices mean the same thing.

Talk to us about an order. Tell us what you are buying, where the supplier is, and which stage you have reached.

About these articles

Packsel Consulting

Purchasing insights · U.S. and Hong Kong

Practical guidance for U.S. businesses buying from Asia.

How we work
More insights

Get in touch

Tell us what you’re buying.

Send us the product, the supplier if you have one, and your dates. We’ll suggest a scope for one stage or the whole order.