Plush toys and children’s products: ASTM F963, CPSIA and pre-shipment checks
Which parts of toy safety need an accredited lab, which an inspector can check at the factory, and what a buyer needs before a children’s product ships.
By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:
Purchasing toys for the U.S. market requires a clear distinction between laboratory testing and factory inspection. Buyers need to identify the applicable requirements, assign responsibility for the supporting documents and confirm that tested samples represent the goods being produced.
This is an overview to help you plan. Confirm the requirements for your product with an accredited lab or a compliance adviser.
The lab side
Under the Consumer Product Safety Improvement Act (CPSIA), the toy safety standard ASTM F963 is mandatory for toys intended for children 12 and under. Children’s products generally must be tested by a CPSC-accepted third-party lab, and the importer or manufacturer issues a Children’s Product Certificate (CPC) based on that testing.
For a plush toy, lab testing typically covers things like:
- small parts, for products intended for children under three
- seam strength and stuffing access
- flammability
- lead in surface coatings and substrates
- phthalates in plasticised parts
- heavy metals in accessible materials
Children’s products also need permanent tracking labels that identify the source and production batch.
The factory side
A pre-shipment inspection can’t replace lab testing, but it can catch problems in the goods that were actually produced. For plush toys, an inspector usually checks:
- Needle detection. Every finished toy should pass through a metal detector to catch broken needles. Check that the machine works with a test piece, and look at the factory’s records and broken-needle log.
- Eyes, noses and small attachments. A torque and tension test on a sample, with a gauge, to see if they come off.
- Seams. Pull tests on seams, and a check for open seams or loose threads.
- Stuffing. Clean, with no foreign matter.
- Labels. Tracking label, age grading, warnings and the law label required by some states for stuffed articles.
- Appearance against the approved sample.
Matching the tested product to the shipped product
A lab report is for the samples the lab tested. Make sure they represent your production. Inspectors can select samples from finished goods and seal them for the lab. If the factory changes a fabric, filling or component after testing, ask whether retesting is needed.
Questions for a toy supplier
- Which CPSC-accepted labs have tested your products?
- Do you have a working needle detector, and how is it checked?
- How do you control broken needles and sharp tools on the production floor?
- Who supplies fabrics, eyes and filling, and what test data do they provide?
- How do you apply batch tracking information to labels?
Third-party inspection for plush toys
A third-party inspection for plush toys typically includes:
- A needle detector check on a sample, including a test with a known metal piece.
- Torque and tension tests on eyes, noses and small attachments.
- Seam strength pull tests.
- Checks on stuffing for foreign matter.
- Label checks: tracking labels, age grading, warnings and any state law labels.
- Appearance and colour against the approved sample.
- Carton and packing checks.
This inspection is separate from the lab testing for the Children’s Product Certificate. You need both.
What we look at in a toy factory
On a plush toy visit, we look at how the factory controls needles: broken-needle logs, how replacement needles are issued, and whether the needle detector is tested at the start of each shift. We watch finished toys pass through the detector and test it with a known metal piece. Those controls tell us more about safety than any single sample.
Packsel Consulting carries out toy inspections with needle-detector and pull-test checks, and selects samples for third-party labs. We don’t issue certificates; the lab and the importer do.
About these articles
Packsel Consulting
Purchasing insights · U.S. and Hong Kong
Practical guidance for U.S. businesses buying from Asia.
How we work