Bluetooth and wireless products: FCC ID checks on samples from Asia
How to check a supplier’s FCC ID, what modular approval does and doesn’t cover, and the checks to run on samples of wireless electronics.
By Packsel Consulting, Purchasing insights
Article date: · 3 min read
Updated:
U.S. buyers sourcing wireless electronics from Asia need to establish which FCC requirements apply to the product and how the supplier supports its compliance claims. Missing or mismatched authorization can create difficulties with retailers, marketplaces and import arrangements.
This article covers practical checks for buyers. Have a test lab or compliance adviser confirm what your product needs.
FCC authorisation, briefly
Products that intentionally transmit radio signals, such as anything with Bluetooth or Wi-Fi, generally need FCC equipment certification before they can be marketed in the U.S. A certified device has an FCC ID, which is printed on the product or, for some small devices, shown electronically.
Devices that only emit radio energy incidentally, such as many electronics without a radio, usually fall under a different procedure, the Supplier’s Declaration of Conformity (SDoC).
Check the FCC ID
The FCC ID has two parts: a grantee code that identifies the company, and a product code. You can look it up in the FCC’s equipment authorisation database. The record shows the company that holds the grant, the frequency range, test reports and often internal and external photos of the device.
Compare the photos with your sample. If the circuit board, antenna or casing looks different, the FCC ID may belong to a different product. Using another company’s FCC ID on your product is a common problem with low-cost suppliers.
Modular approval
Many products use a pre-certified Bluetooth or Wi-Fi module. The module has its own FCC ID, and the product may be labelled “Contains FCC ID: …”. That can simplify things, but it doesn’t cover everything:
- the module must be used within the conditions of its grant, such as the approved antenna
- the finished product usually still needs to meet the rules for unintentional emissions from the rest of the device
- if you sell under your own brand, check who is responsible for the authorisation
Checks on samples
Before approving samples or production, check:
- the FCC ID or “Contains FCC ID” label is present and matches the database record
- the board and antenna match the photos in the FCC filing
- labelling and user manual include the required FCC statements
- the product pairs, connects and performs over the expected range
- battery and charging behaviour, if the product has a battery (see lithium battery shipping)
At pre-shipment inspection
The inspector can compare the finished product with the approved sample and the FCC photos, check labels and manuals, and run function tests on a sample: pairing, audio, range, charging and buttons. They can open a unit, with agreement, to compare the board with the approved one. Component changes between the sample and production are where compliance usually slips.
How we check wireless products
On a wireless product inspection, we look up the FCC ID before the visit and download the external and internal photos from the FCC filing. On site, we compare the label, the casing and, with the client’s permission, the board and antenna of an opened unit against those photos. We pair sample units, test range and audio, and check charging. Board changes between the approved sample and production are the most common finding.
Packsel Consulting checks wireless products against their approved samples during inspections, including label and FCC ID checks. Certification itself is done by an accredited test lab.
About these articles
Packsel Consulting
Purchasing insights · U.S. and Hong Kong
Practical guidance for U.S. businesses buying from Asia.
How we work