Pallet Racking from China: Load Ratings, Steel and Inspection
What to check when buying pallet racking from China: RMI/ANSI MH16.1 design, load ratings and plaques, steel and connectors, seismic and permit requirements, and inspection.
By Packsel Consulting, Purchasing insights
Article date: · 3 min read
Updated:
Pallet racking used in U.S. warehouses is commonly designed to the RMI specification, ANSI MH16.1, which covers design, testing, and load plaques. Before buying racking from China, confirm the design meets that specification and your local code, including seismic requirements, and check the steel, connectors, and load ratings at inspection.
Selective pallet racking, drive-in racking, and cantilever racking are common imports for warehouses and distribution centres.
Design and engineering
Racking is a structure. Many jurisdictions require permits and engineered drawings for racking above a certain height, and fire codes affect high-piled storage. Seismic design depends on location. Ask an engineer to review the design before ordering.
Load ratings and plaques
Each bay needs a load rating for beam levels and uprights. ANSI MH16.1 calls for load plaques showing the permitted loads. Ask the supplier to provide plaques and the calculations behind them.
Steel and connectors
Check:
- Upright and beam steel grade and thickness, against the drawings.
- Beam connectors and safety locks, which stop beams lifting out.
- Base plates and anchor bolts.
- Paint or galvanizing.
Ask for mill certificates for the steel.
Inspection
At inspection, measure steel thickness and dimensions, check welds on connectors, test fit beams to uprights, check coating, and confirm quantities and packing lists.
Specify the system completely
A racking order should list:
- Upright frame height, depth, and capacity.
- Beam length, profile, and capacity per pair.
- Number of levels and bays.
- Accessories: wire decks, pallet supports, row spacers, and column guards.
- Anchors and base plates suitable for your floor.
- Finish, such as powder coat colour or galvanizing.
Give the supplier your pallet sizes and weights, forklift type, and building height.
For a project that also includes forklifts, use our forklift inspection checklist to scope those checks separately.
Questions to ask the supplier
- Is the design based on ANSI MH16.1, and can you provide calculations?
- What steel grade and thickness are used for uprights and beams?
- How are beam connectors tested?
- Can you supply load plaques for each configuration?
- Have you supplied racking to the U.S. before?
Common problems
- Steel thinner than specified, which reduces capacity.
- Beam connectors that do not fit the uprights tightly.
- Safety locks missing or loose.
- Load plaques missing or inaccurate.
- Hole patterns that vary between batches, so beams do not fit.
Consider a hypothetical warehouse that buys racking in two orders, months apart. The second batch has a slightly different hole pattern, and beams from the new order do not fit uprights from the first. Specifying the hole pattern and checking it at inspection avoids the problem.
How we inspect racking
We measure upright and beam steel thickness with a micrometer, check hole spacing on uprights from different batches, and fit beams to uprights to confirm the connectors and safety locks engage. We check coating and count components against the packing list.
Mistakes to avoid when buying racking
- Ordering without engineered drawings and load calculations for your site.
- Buying a second batch later without specifying the same hole pattern.
- Forgetting load plaques, anchors and safety locks.
- Assuming steel thickness matches the drawing without measuring.
How Packsel Consulting can help
We verify racking manufacturers, check materials and dimensions, and inspect racking before shipment. We do not provide engineering design.
Talk to us about an order. Tell us what you are buying, where the supplier is, and which stage you have reached.
About these articles
Packsel Consulting
Purchasing insights · U.S. and Hong Kong
Practical guidance for U.S. businesses buying from Asia.
How we work