Equipment & Machinery

Forklifts from China: what to check at the factory before they ship

Data plates, load centres, mast drift, brakes, EPA engines and UL type ratings. A pre-shipment checklist for forklifts and warehouse trucks bought from Asia.

By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:

A forklift purchase requires more than a comparison of capacity and unit price. Buyers sourcing from China should confirm the truck configuration, documentation and intended operating conditions, then plan factory checks around the requirements of the U.S. facility where it will be used.

The paperwork that has to match the truck

Data plate. Every truck needs a capacity plate showing the rated load at a stated load centre and lift height, plus the truck’s weight. U.S. buyers usually expect capacities at a 24-inch load centre. Some makers quote at 500 mm, which is close but not identical, and any attachment such as a side-shifter or clamp reduces the real capacity. Check the plate matches the configuration you ordered, attachments included.

Design standard. In the U.S., OSHA’s rule for powered industrial trucks (29 CFR 1910.178) refers to the ANSI B56.1 design standard, now maintained by ITSDF. Ask the manufacturer to confirm in writing that the model is designed and tested to ANSI/ITSDF B56.1, and for the test reports.

Engines. Diesel and LPG trucks need engines covered by an EPA certificate. Check the engine label against the certificate before ordering, as you would for any nonroad engine.

Electric trucks and hazardous areas. Many U.S. sites expect electric trucks to carry a UL type designation under UL 583, and some areas (dust, flammable vapours) require specific types. Lithium battery packs raise their own questions: who makes the cells, which standard the pack is certified to, and whether you have the UN 38.3 test summary to ship it. See our note on lithium battery documents.

Checks on the truck itself

Before the truck is run:

  • Mast and chains: chain wear and lubrication, mast rollers, carriage, fork heels and tips for cracks, fork locking pins.
  • Hydraulics: hoses routed away from pinch points, no weeping at cylinders or the valve block.
  • Overhead guard and load backrest fitted and undamaged.
  • Tyres: type as ordered (cushion or pneumatic), correctly fitted.
  • Components: record the brand and serial of engine or motor, controller, hydraulic pump and battery. Compare with the agreed specification.
  • Decals and manuals in English.

Running checks, ideally with a test load at rated capacity:

  1. Lift to full height and lower, checking smooth travel and lowering speed.
  2. Drift test: hold the rated load raised with the controls in neutral and measure how far the forks drop, and how far the mast tilts forward, over a set period. B56.1 sets limits. Agree beforehand how you’ll measure it.
  3. Tilt forward and back, side-shift if fitted.
  4. Travel and braking in both directions, loaded and unloaded. Check the parking brake holds on a slope if the factory has one.
  5. Steering, horn, lights, travel alarm, seat switch and seat belt.
  6. For electric trucks: charge state, charger function, display warnings.

Before the order, not after

Most problems with imported forklifts are settled in the specification: load centre and capacity with attachments, the design standard, engine certification, UL type, battery chemistry and the U.S. dealer or service arrangement. Put all of them in the purchase order, then check them at a pre-shipment inspection.

If the forklift will operate around pallet racks, review the pallet racking buying guide alongside the forklift specification.

Electric, LPG or diesel: what changes in the inspection

Electric forklifts: we focus on the battery (type, capacity, charger, and transport documents for lithium), the controller and motors, and any UL type designation the site needs.

LPG forklifts: we check the engine certification, the LPG system and tank mounting, and the regulator and hoses.

Diesel forklifts: we check the engine certification and label, exhaust and emissions equipment, and cooling.

What we do on a forklift inspection

On site, we photograph the data plate first and compare it with the order: capacity, load centre, lift height and attachments. We lift a test load to full height, hold it, and measure drift over a set time. We drive the truck loaded and unloaded, test the brakes, and check the mast for smooth travel and noise. We record the serial numbers of the engine or motor, controller and hydraulic pump, so the client can trace them against the quotation.

Packsel Consulting verifies forklift manufacturers and inspects trucks before shipment. We check the documents and the truck against them; certification itself comes from the manufacturer and the testing body.

About these articles

Packsel Consulting

Purchasing insights · U.S. and Hong Kong

Practical guidance for U.S. businesses buying from Asia.

How we work
More insights

Get in touch

Tell us what you’re buying.

Send us the product, the supplier if you have one, and your dates. We’ll suggest a scope for one stage or the whole order.