Equipment & Machinery

Concrete Block Making Machines from China: What to Check

What to check when buying a concrete block machine from China: automation level, vibration and pressure, molds, cycle time, pallets, curing, and block standards.

By Packsel Consulting, Purchasing insights
Article date: · 3 min read
Updated:

When buying a concrete block making machine from China, check the automation level, the vibration and hydraulic pressing system, the molds included, the real cycle time, and what the complete plant needs, such as batching, pallets, and curing. Remember that the blocks, not the machine, must meet your local standards, such as ASTM C90 for load-bearing concrete masonry units in the U.S.

China exports block machines from small manual models to fully automatic plants.

Automation level

  • Manual and semi-automatic machines need more labour and suit small outputs.
  • Fully automatic machines include automatic feeding, pressing, and pallet handling.
  • Complete plants add batching, mixing, conveyors, stacking, and curing.

Decide on output per shift and labour available before comparing machines.

Vibration and pressing

Block density and strength depend on vibration and pressure. Ask about the vibration system (table vibration, mould vibration, or both), the hydraulic pressure, and the motor brands.

Molds

Each block size and shape needs a mold. Ask which molds are included, the mold steel and heat treatment, and the cost of extra molds.

Cycle time and output

Output is usually quoted as blocks per hour for a standard block. Ask which block, and check the cycle time during a trial.

Pallets and curing

Blocks are formed on pallets and must cure before stacking. Plan the number of pallets, curing space or chambers, and the time needed.

Block standards

In the U.S., load-bearing concrete masonry units are commonly specified to ASTM C90. Block strength depends on the mix, materials, and curing as much as the machine. Test blocks made on the machine at an independent lab.

Inspect and test

Witness a trial with a mix close to yours, check the blocks for dimensions and finish, and send samples for strength testing.

Questions to ask the supplier

  1. What output do you guarantee for our block size?
  2. What vibration and pressing system is used?
  3. Which molds are included, and what steel are they made from?
  4. How many pallets are needed for our output?
  5. What batching and mixing equipment is needed?
  6. What installation and training is included?

Common problems

  • Blocks with inconsistent density or dimensions.
  • Molds that wear quickly.
  • Output lower than expected.
  • Missing equipment for batching or curing.

Consider a hypothetical buyer who orders a block machine without a matching batching plant. Output is limited by mixing capacity, not the block machine. Specifying the complete line avoids the bottleneck.

How we test a block machine

For a block machine trial, we ask the factory to use a mix close to the client’s. We time the cycle, count blocks produced over a period, and measure sample blocks for dimensions and finish. We send sample blocks for strength testing after curing, because block strength depends on the mix and curing as much as the machine.

Mistakes to avoid when buying a block machine

  • Buying the machine without the batching, mixing and curing it needs.
  • Judging output from a brochure figure for a different block.
  • Testing block strength only on blocks the supplier selected.
  • Not ordering enough pallets for the planned output.

How Packsel Consulting can help

We compare block machine suppliers and witness trials at the factory. We can also coordinate shipping of complete plants through shipping coordination.

Talk to us about an order. Tell us what you are buying, where the supplier is, and which stage you have reached.

About these articles

Packsel Consulting

Purchasing insights · U.S. and Hong Kong

Practical guidance for U.S. businesses buying from Asia.

How we work
More insights

Get in touch

Tell us what you’re buying.

Send us the product, the supplier if you have one, and your dates. We’ll suggest a scope for one stage or the whole order.