Equipment & Machinery

Plastic Recycling Machines from China: Shredders, Washing Lines and Pelletizers

The machines in a plastic recycling line, how to match them to your material and contamination, and what to test before buying plastic recycling equipment from China.

By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:

A plastic recycling line usually combines size reduction (a shredder or granulator), washing and separation, drying, and pelletizing in an extruder with a melt filter. Which machines you need depends on the type of plastic, how dirty it is, and whether you want to sell flakes or pellets.

China is one of the largest suppliers of plastic recycling machinery. Lines range from a single granulator to complete washing and pelletizing plants.

Size reduction

Shredders cut large or bulky items into coarse pieces at low speed. Granulators cut smaller pieces into uniform flakes at higher speed. Many lines use a shredder first and a granulator second. Compare motor power, rotor design, blade material, and screen size.

Washing and separation

Post-consumer plastic needs washing to remove labels, dirt, and food residue. A washing line can include:

  • Friction washers.
  • Hot washing tanks for heavily contaminated material.
  • Sink-float tanks that separate plastics by density.

The design depends on your material. PET bottles, agricultural film, and HDPE containers need different lines.

Drying

Flakes must be dried before pelletizing. Lines use centrifugal dryers, squeezers for film, or thermal dryers.

Pelletizing

An extruder melts the flakes, filters out contamination with a screen changer, and cuts the melt into pellets. Film is often compacted before extrusion. Compare the screw design, venting for moisture and gases, the melt filter, and the pellet cutting system.

Read capacity claims carefully

Output is quoted in kilograms per hour, but it depends heavily on the material and how contaminated it is. Ask for the capacity on your material, and send a sample for a trial if possible.

Plan for utilities and waste

Washing lines use water and produce wastewater that may need treatment. Confirm power, water, and space requirements, and check local permits.

Inspect before shipment

Check motor and gearbox brands, blade quality, welds, electrical panels, and a trial run with your material. Our factory acceptance testing guide explains how to run the test.

Questions to ask the supplier

  1. What output do you guarantee on our material?
  2. What level of contamination can the line handle?
  3. What is the water consumption of the washing line?
  4. Which motors, gearboxes, and screens are used?
  5. Can you run a trial with our material?
  6. What installation and training is included?

Common problems

  • Output much lower than quoted because of contamination.
  • Washing that does not remove labels or residue.
  • Pellets with moisture or contamination.
  • Wastewater that needs treatment.

Consider a hypothetical recycler buying a film line rated on clean film. The real material is dirty agricultural film, and output drops sharply. A trial with the real material would have shown the gap.

How we run a recycling line trial

For a recycling line, we ask the client to send material as it will actually arrive, including its contamination. During the trial we weigh input and output over a timed period, look at the washed flakes for remaining labels and dirt, and check the pellets for moisture and contamination. We note water use and the waste produced, which affect running costs and permits.

Mistakes to avoid when buying recycling equipment

  • Judging capacity from tests on clean material.
  • Leaving out drying or water treatment.
  • Underestimating the space and utilities the line needs.
  • Skipping a trial with your own material.

How Packsel Consulting can help

We source recycling equipment suppliers, arrange trials with your material, and inspect lines before shipment.

Talk to us about an order. Tell us what you are buying, where the supplier is, and which stage you have reached.

About these articles

Packsel Consulting

Purchasing insights · U.S. and Hong Kong

Practical guidance for U.S. businesses buying from Asia.

How we work
More insights

Get in touch

Tell us what you’re buying.

Send us the product, the supplier if you have one, and your dates. We’ll suggest a scope for one stage or the whole order.