Paying for an injection mould in China: a buyer’s checklist
Define injection tooling specifications, sample approvals and ownership arrangements before committing to a mold purchase.
By Packsel Consulting, Purchasing insights
Article date: · 4 min read
Updated:
Injection tooling represents both an upfront cost and a production asset. Before paying for a mold, agree its specification, approval process, ownership and permitted use. Those records become particularly important if production later moves to another supplier.
Define the tooling specification
An injection mould is a steel tool, machined to the shape of your part, that fits in a moulding machine. Its price depends on:
- Size and complexity. Undercuts need slides or lifters, which add cost.
- Number of cavities. A two-cavity mould makes two parts per cycle. More cavities cost more up front and less per part.
- Steel. Common choices include P20 and 718H for general work, H13 for longer runs and higher temperatures, and stainless grades such as S136 where corrosion resistance or a polished finish matters.
- Runner system. Hot runners waste less material and cost more.
- Expected life. Many quotes refer to the SPI mould classes, from Class 101 (over a million cycles) down to Class 105 (prototype). Ask which class the quote is for.
Ask for a quote that lists each of these, so two mould quotes can be compared.
The design review
Before steel is cut, the toolmaker should send a design for manufacturability (DFM) report. It shows the parting line, gate locations, ejector pin marks, draft angles and any changes they suggest. Read it carefully. Ejector marks on a visible face, or a gate where a cosmetic surface should be, are easy to fix now and expensive later.
T1 samples and approval
The first parts off the mould are T1 samples. They’ll rarely be perfect. Expect some rounds of adjustment (T2, T3) to fix dimensions, flash, sink marks or warping.
Agree beforehand:
- which dimensions will be measured, and against which drawing revision
- how many rounds of adjustment are included in the price
- what “approved” means, and who signs it off
Keep the approved samples. They become your reference for production.
Document tooling ownership
This is the most important part. Get a short tooling agreement that states:
- you own the mould once paid for
- it will be used only for your parts
- it will be maintained by the factory, with a note of who pays for repairs
- the expected life, and what happens when it wears out
- it will be released to you or a supplier you name, within an agreed time, on request
Ask for photos of the mould with your mould number engraved or stamped on it. Ask for the mould drawings or 3D files to be handed over too.
Agree tooling payment milestones
A common pattern is 50 percent at order and 50 percent on approval of T1 or final samples. Tying the second payment to sample approval keeps the toolmaker focused on getting it right.
What to keep on file for every mould
Keep a short record for each mould you own:
- Mould number, part number and cavities.
- Toolmaker, date completed and price paid.
- Steel, hot runner and mould class.
- Location: which factory has it now.
- Approved sample date and drawing revision.
- Shot count at the last check, if the mould has a counter.
- Photos of the mould, closed and open.
This record is what makes a later transfer, repair or dispute manageable.
How we follow a new mould
When we follow a new mould for a client, we review the DFM report before steel is cut, attend or review T1 sample trials, and measure the samples against the drawing. We keep the open issues on one list, so each sampling round is judged against what was promised in the last one. When the samples are approved, we photograph the mould with its number visible and record its condition for the file.
Packsel Consulting helps buyers negotiate tooling terms, check the toolmaker and follow sample rounds as part of production oversight. Moving an existing mould? Read our guide to mould transfers.
About these articles
Packsel Consulting
Purchasing insights · U.S. and Hong Kong
Practical guidance for U.S. businesses buying from Asia.
How we work