Quality

Ceramic tableware imports: lead and cadmium testing explained

Why glazes can leach lead and cadmium, the test method labs use, and how to plan testing for plates, mugs and bowls sourced from Asia.

By Packsel Consulting, Purchasing insights
Article date: · 5 min read
Updated:

Ceramic tableware sourced from Asia requires attention to the glazes and decorations that contact food. Some can release lead or cadmium, particularly into acidic foods. Buyers should plan leach testing around the actual materials and decoration combinations used in production.

This is an overview to help you plan, not regulatory advice. Limits differ by product type and market, and they change; confirm the current requirements for your product.

Where the risk comes from

Lead and cadmium have long been used in some glazes and decorative colours because they give bright colours and a smooth finish. If the glaze is badly formulated or under-fired, the metals aren’t locked into the glass and can leach out. Decorations on the rim, where lips touch, are a particular concern.

How it’s tested

The usual method soaks the ware in a dilute acetic acid solution (similar to vinegar) for 24 hours at room temperature, then measures how much lead and cadmium has dissolved. ASTM C738 is a standard method for this, and labs often use it alongside the FDA’s own methods.

Results are compared with limits that depend on the type of ware: flatware such as plates, small hollowware, large hollowware, cups and mugs, and pitchers. The FDA publishes action levels in two compliance policy guides, one for lead and one for cadmium. Each sets limits by ware type and says how many units are tested. California’s Proposition 65 may apply stricter limits for products sold there.

Planning a test programme

  • Test each glaze and decoration combination, not just each shape. A new colour or decal is a new risk.
  • Draw samples from production, not from a sample room. An inspector can select and seal samples from finished cartons and send them to the lab.
  • Test again when something changes: a new glaze supplier, a new decal printer, or a different firing schedule.
  • Keep the reports with the order records.

Things to ask the factory

  1. Who supplies the glazes and decals, and do they have lead and cadmium test data for them?
  2. What is the firing temperature and schedule, and how is it controlled?
  3. What testing does the factory do itself, and how often?
  4. Have they made tableware for the U.S. before, and which lab did the testing?

A visit to see the kilns and the glaze room tells you a lot about how controlled the process is.

Marking

Ceramicware that isn’t suitable for food use has its own labelling requirements in the U.S. If you sell decorative pieces, check how they need to be marked.

Other checks at inspection

A pre-shipment inspection on tableware usually covers glaze defects (pinholes, crawling, bare spots), chips and cracks, warping and stacking, colour against the approved sample, decal placement and sharpness, and dishwasher or microwave claims if you make them. Packaging matters too: ceramics break in transit if the inserts are poor.

Which tableware needs leach testing?

Leach testing matters most for surfaces that touch food or drink:

  • Plates, bowls, platters and serving dishes.
  • Mugs, cups and the rims where lips touch.
  • Pitchers and jugs, which hold liquids for longer.
  • Baking and cooking ware, where heat and acidic food speed up leaching.

Decorative pieces not intended for food are treated differently, but they need clear marking that they aren’t for food use. If a decorative piece looks like tableware, plan for testing anyway.

Glaze, decal and colour: what changes the risk

Bright reds, oranges and yellows have historically been the colours most associated with lead and cadmium. Decals applied on top of the glaze (on-glaze decoration) carry more risk on food surfaces than decoration under or in the glaze. Low firing temperatures and a short firing schedule can leave glazes under-fired. Each of these is a reason to test the specific combination you’re buying.

What we do on a ceramics factory visit

On a ceramics visit, we ask to see the glaze room and the kiln, including the firing records for recent loads. We ask which suppliers provide the glazes and decals and whether the factory has their test data. During production we select finished pieces from cartons for the lab ourselves, seal the bags, and send them directly. That way the lab report describes the goods in the shipment, not pieces chosen by the factory.

Kitchenware and tableware inspection: what else to check

Leach testing is one part of a tableware order. A pre-shipment inspection also covers:

  • Chips, cracks and crazing, especially on rims and handles.
  • Glaze defects: pinholes, bare spots and crawling.
  • Flatness and stacking, so plates and bowls nest without rocking.
  • Decoration placement and colour against the approved sample.
  • Dishwasher, microwave and oven claims, where the packaging makes them.
  • Packing strength, because breakage in transit is a common claim.

See also kitchen equipment inspections in China.

Packsel Consulting draws and seals samples for lab testing during inspections and follows ceramics orders through production oversight.

About these articles

Packsel Consulting

Purchasing insights · U.S. and Hong Kong

Practical guidance for U.S. businesses buying from Asia.

How we work
More insights

Get in touch

Tell us what you’re buying.

Send us the product, the supplier if you have one, and your dates. We’ll suggest a scope for one stage or the whole order.